
NOTE
•Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder.
•When “DENON LINK” is assigned at the GUI menu “Assign” setting, the PCM signals, network audio signals (Internet radio, media server, USB and Rhapsody), XM signals and HD Radio signals input from the digital input connectors cannot be output from the analog REC OUT connectors.
•Input sources for which “Delete” is selected at “Source Delete” cannot be selected.
HDMI Control Function
When connecting the
•Turn power ON/OFF (Synchronize with television)
•Switch to sound output equipment (TV and
•Adjust volume
•Switch input source
Setup Connections Started Getting
Dolby Headphone recording
When REC OUT mode is set to “SOURCE”, with the
1The Dolby Headphone play mode is set when headphones are connected to <PHONES> during playback in the STANDARD (DOLBY/DTS
Surround) mode.
When this is done, signals encoded in the Dolby Headphone mode are automatically output from the recording output terminals (analog and digital) and can be recorded.
2Select the parameters and set the desired mode.Start recording.
Refer to the “Dolby Headphone” (vpage 49).
NOTE
Do not disconnect the headphones during recording.
•When using these functions set as follows: GUI menu “Manual Setup” – “HDMI Setup” – “HDMI Control” (vpage 32).
•When using these functions do not assign the “HDMI” to “TV/CBL”.
Connections
Player compatible | Television compatible with | ||||
with HDMI | |||||
HDMI control function | |||||
control function | |||||
| "6%*0 |
|
| ||
|
|
|
| ||
)%.* | "6%*0 | 015*$"- | )%.* | ||
065 | 065 | 065 | */ | ||
| - | 3 |
|
| |
| L | R |
|
| |
| L | R |
|
|
Troubleshooting Information
70