Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

SOURCE SELECT <ZONE2/3/4/ REC SELECT> VOLUME

<ZONE2 ON/OFF> <ZONE3 ON/OFF> <ZONE4 ON/OFF>

[AMP]

[ON]

[ON]

(ZONE2 mode)

[OFF]

[OFF]

 

(ZONE3 or

 

ZONE4 mode)

VOLUME

 

[MUTE]

[MENU]

SOURCE

 

SELECT

 

(Main remote control unit)

Multi-zone

[ZONE SELECT]

indicator

 

[ON] [OFF]

SOURCE SELECT

VOLUME

[MUTE] [MENU]

(Sub remote control unit)

About the button names in these explanations

<> : Buttons on the main unit

[ ] : Buttons on the remote control unit

Button name only:

Buttons on the main unit and remote control unit

Multi-Zone Operations

Turning the Power On and Off

GOperation on the main unitH

Press <ZONE2 ON/OFF>, <ZONE3 ON/OFF> or <ZONE4 ON/OFF> for the zone to be operated.

When the power turns on, the multi-zone indicator lights on the display.

GOperation on the remote control unitH

In the zone mode you want to operate, press [ON] or [OFF].

Selecting the Input Source

GOperation on the main unitH

qPress <ZONE2/3/4 / REC SELECT> and select the zone to be adjusted. w Turn <SOURCE SELECT>.

GOperation on the remote control unitH

In the zone mode you want to operate, press [SOURCE SELECT].

Adjusting the Volume

GOperation on the main unitH

qPress <ZONE2/3/4 / REC SELECT> and select the zone to be adjusted. w Turn <VOLUME> to adjust.

GOperation on the remote control unitH

In the zone mode whose volume you want to adjust, press [VOLUME].

[Variable range] – – – –70dB ~ –40dB ~ 18dB

•The volume can be adjusted when GUI menu “Manual Setup”

–“Zone Setup” – “(select the zone)” – “Volume Level” is set to “Variable”. The volume can be increased up to the value set at GUI menu “Manual Setup” – “Zone Setup” – “(select the zone)”

–“Volume Limit” (vpage 38).

•The volume for ZONE2 and ZONE3 can be adjusted with the remote control unit.

Turning off the Sound Temporarily

In the zone mode for which you want to mute the sound, press [MUTE].

The sound is reduced to the level set at GUI menu “Manual Setup”

–“Zone Setup” – “(select the zone)” – “Mute Level” (vpage 38). To cancel, either adjust the volume or press [MUTE] again.

The setting is canceled when the zone’s power is turned off.

•The source selected for ZONE3 is also output from the recording output connectors.

•When the [MENU] is selected, it is possible to carryout “Zone Setup” looking at the on-screen display in ZONE2. Also, when the “OSD” is set as “ZONE2/ZONE3”, the on-screen display comes on the ZONE2 monitor when ZONE3 has been operated so it is possible to operate it looking at this.

 

ZONE2 MENU

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INPUT :DVD

 

ZONE2 MENU

 

 

 

 

SIGNAL:ANALOG

 

>Channel

STEREO

VOL. :-40dB

 

 

Vol.Lev.

VAR

 

 

 

 

>Bass

0dB

Vol.Limit

OFF

P.On Lev.

LAST

Treble

0dB

Mute Lev.

FULL

HPF

OFF

Lch Lev.

0dB

 

 

 

Rch Lev.

0dB

 

 

 

 

 

 

 

 

 

 

NOTE

•The digital signal from the digital input connectors (OPTICAL/ COAXIAL) are output to the analog audio connectors in ZONE2 and ZONE3 in the case of PCM (2-channel) signals only.

•Digital audio signals input from the DENON LINK or HDMI connectors cannot be played in multi-zone.

•“XM” or “HD Radio” cannot be selected with digital output (OPTICAL) in ZONE2. Copyright-protected Network audio signals (Internet radio, media server, USB, Rhapsody) cannot be output.

•In ZONE4, it is not possible to select “XM”, “HD Radio”, or sources with no digital input signals (“TUNER”, “PHONO”, “iPod”, etc.). Network audio signals (Internet radio, media server, USB, Rhapsody) can be played as long as they are not copyright-protected.

•When certain digital signals are being input, noise may be output from the ZONE2 and ZONE3 audio output connectors.

83