Wireless LAN settings

Make settings for wireless LAN.

Getting

Turn on the AVP-A1HDCI’s power.

If no Ethernet cable is connected

The mode automatically switches to “Wireless”.

Display GUI menu “Manual Setup” – “Network Setup” – “Network Setup”.

Access point settings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

z

 

To search for the network automatically

 

 

 

 

To set manually

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Search

 

 

 

 

 

 

“Detail” setting

 

 

 

 

 

 

 

 

 

 

 

 

 

q Input the SSID.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

w If there is security, select

 

 

 

 

 

 

 

 

 

 

 

 

the encryption method.

 

If searching is possible, the

 

If searching is not possible

 

e Input the encryption key.

 

access points are displayed.

 

 

 

 

 

 

 

r If “WEP” was selected in

 

 

 

 

 

 

 

 

 

 

 

 

step w, select the default

 

 

 

 

 

 

 

 

 

 

 

 

key.

 

 

 

 

 

 

 

 

 

 

 

 

 

Normally select “1”.

 

 

Select the access point to

Make the SSID setting at

 

 

 

 

 

 

 

be set.

“Manual”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Without security

 

With security

 

 

 

 

 

Input the encryption key. For WEP, also input the default key.

Connection (continued on right page)

Connection

To acquire the IP address

To enter the IP address manually

automatically using the DHCP function

At the GUI menu “Manual Setup” – “Network Setup” – “Network Setup” – “Detail” setting, set “DHCP” to “OFF” and enter the IP address, subnet mask, default gateway, primary DNS and secondary DNS.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To not pass through the proxy server

 

When a proxy server is used

 

 

 

 

 

 

This setting is required when the network is established via proxy servers.

At the GUI menu “Manual Setup” – “Network Setup” – “Network Setup” – “Detail” – “Proxy” setting, set “Proxy” to “ON” and enter the address or domain name and port numbers.

This completes the setting.

z: This is the flow for infrastructure type communications. For ad-hoc communications, set “Mode” at the “Detail” settings to “Ad-hoc”.

NOTE Knowledge about networks is required to make the IP address and proxy settings. For details, consult a network administrator.

Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started