Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.

Playback Setup Connections Started Getting

Remote Control Unit Operations

Main Remote Control Unit

•On the main remote control unit, the display switches according to the device being operated and the mode.

•In modes other than iPod, the mode switches between“”

and “” each time the [MODE SELECTOR] is pressed.

•In the AMP, TUNER, NET/DTU and iPod modes, when the remote ID is set, the AVP-A1HDCI can be used independently even in an environment containing multiple DENON amplifiers.

Operating DENON Audio Components

1Press [MODE SELECTOR] for the component to be operated.

The indicator for the component to be operated flashes.

: AMP / ZONE2 / ZONE3 / ZONE4 /

: iPod

SYSTEM CALL

 

: TUNER (FM/AM) / XM

: DVD player (recorder) /

 

CD player (recorder)

: NETWORK/USB /

: VCR / TAPE

DIGITAL TUNER (HD Radio)

 

: Satellite Receiver / Cable TV

: TV

b The mode switches each time [AMP] is pressed.

Presetting

The included main remote control unit can be preset to operate devices of various brands.

1Press [MODE SELECTOR] for the device you want to preset.

2

3Press [NUMBER] and input the 5-digit number of the brand of the component to be preset. The numbers are shown in the Preset Code Table (vEnd of this

manual).

Zone-Multi Control Remote

[AMP]

Signal transmission indicator

[MODE SELECTOR]

When the code is registered, the signal transmission indicator flashes twice.

When the preset code is transmitted, the mode indicator for the component to which that code belongs flashes.

b The input mode is canceled if no button is operated for 10 seconds.

Some brands have more than one preset code. If the component does not operate, try inputting a different code.

Information

GSYSTEM CALL modeH

GZONE4 modeH

Operating Preset Components

Troubleshooting

[HOME]

[NUMBER]

[RC SETUP]

2Operate the component.

b For details, refer to the component’s operating instructions.

1Press [MODE SELECTOR] for the component to be operated.

The mode indicator of the device to be operated flashes.

2Operate the component.

b For details, refer to the component’s operating instructions.

Depending on the model and year of manufacture of your equipment, some buttons may not operate.

NOTE

The device mode (“” or “”) cannot be changed while the setting is being made.

[HOME] is used to return to the AMP mode (AMP, ZONE2, ZONE3, ZONE4 or SYSTEM CALL) when in any mode other than AMP.

73