Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

Multi-zone indicator [ZONE SELECT]

[ADVANCED SETUP] [ZONE OFF]

[MENU]

 

[RANDOM]

[ALL MUSIC/

[REPEAT]

FAVORITES]

 

[USB]

Switching Zones

Use this procedure to select the zone to be operated by the sub remote control unit.

1Press [ZONE SELECT].

The currently selected multi-zone indicator lights.

2While the multi-zone indicator is light, press [ZONE SELECT] to select the zone to be operated.

The currently selected multi-zone indicator lights.

Setting the Zone for Which the Sub Remote Control Unit is Used (ZONE SELECT LOCK Mode)

We recommend always using the sub remote control unit for the same room. When this is done, the unit can be set so that the zone does not switch when buttons are operated.

1Use the tip of a pen to press [ADVANCED SETUP]. All the multi-zone indicators light.

 

Select the multi-zone to be set.

2The selected multi-zone indicator lights.

qTo set to “MAIN ZONE”: Press [REPEAT].

wTo set to “ZONE2”

: Press [RANDOM].

eTo set to “ZONE3”

: Press [USB].

rTo set to “ZONE4”

: Press [ALL MUSIC/FAVORITES].

 

 

 

 

3

Use the tip of a pen to press

[ADVANCED SETUP].

 

 

The multi-zone indicator turns off.

 

To Cancel

 

 

1

Use the tip of a pen to press

[ADVANCED SETUP].

 

 

The currently selected multi-zone indicator lights.

 

 

 

 

2

Press [ZONE SELECT].

 

 

 

 

All the multi-zone indicators light.

 

 

 

 

 

3

Use the tip of a pen to press

[ADVANCED SETUP].

 

The multi-zone indicator turns off.

Setting the Remote ID

When using multiple DENON AV receivers in the same room, make this setting so that no AV receiver other than the desired one operates.

1While pressing [MENU], press [ADVANCED SETUP] with the tip of a pen.

The multi-zone indicator corresponding to the currently selected remote ID flashes.

2Select the remote ID to be set.

qTo set to 1 : Press [REPEAT].

The “M” indicator flashes. wTo set to 2 : Press [RANDOM].

The “Z2” indicator flashes. eTo set to 3 : Press [USB].

The “Z3” indicator flashes.

rTo set to 4 : Press [ALL MUSIC/FAVORITES]. The “Z4” indicator flashes.

3While pressing [MENU], press [ADVANCED SETUP] with the tip of a pen.

The multi-zone indicator turns off.

NOTE

When changing a setting, be sure to set the same remote ID as the AVP-A1HDCI’s (vpage 41).

Resetting the Settings

While pressing [ZONE OFF], press [ADVANCED SETUP] with the tip of a pen.

All the multi-zone indicators flash 4 times, then all the settings are restored to their defaults.

81