Setting the Time the Backlight Stays Lit
1Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.
2Press [9], [7] and [3], in that order.
The signal transmission indicator flashes twice and the backlight on time setting mode is set.
3Set the light on time.
The signal transmission indicator flashes twice.
[Settable times] : [1] : 5 sec.
[2]: 10 sec. (Default)
[3]: 15 sec.
[4]: 20 sec.
[5]: 25 sec.
Adjusting the Backlight’s Brightness
The display’s brightness can be adjusted in 5 steps. (Default: Step 3)
1Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.
2Press [CHANNEL +] or [CHANNEL
The display gets one step brighter when [+] is pressed. The display gets one step darker when
3Press [RC SETUP] to complete the setting.
Resetting the Main Remote Control Unit 
Learning Function
GResetting button by buttonH
1Press [MODE SELECTOR] for the device you want to reset.
2Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.
3Press [9], [7] and [6], in that order.
The signal transmission indicator flashes twice.
4
GResetting by device modeH
1Press [MODE SELECTOR] for the device you want to reset.
2Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.
3Press [9], [7] and [6], in that order.
The signal transmission indicator flashes twice.
4Press [MODE SELECTOR] for the device you want to reset twice.
The signal transmission indicator flashes twice.
System call function
1Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.
2Press [9], [7] and [8], in that order.
The signal transmission indicator flashes twice.
3Press [SYSTEM CALL] (1, 2 or 3) you want to reset.
4Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.
1Press [MODE SELECTOR] for the device you want to reset (TV or SAT/CBL).
2Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.
3Press [9], [8] and [4], in that order.
The signal transmission indicator flashes twice.
4Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.
All settings
1Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.
2Press [9], [8] and [1], in that order.
The signal transmission indicator flashes 4 times.
All the settings are restored to their defaults.
Troubleshooting Information
78