Selecting Audio Programs
An HD Radio broadcast includes up to 8 audio programs (HD1 to HD8 and Analog). The different audio programs also have data programs.
Press [SEARCH] or uito select the audio program.
If the station you are listening to has multiple audio programs, “HD1” is indicated on the display. If it only has one audio program, “HD” is indicated.
If an audio program from HD2 to HD8 has been interrupted, HD1 is automatically selected after about 20 seconds.
Check the HD Radio Reception
Information
Press <STATUS> while an HD Radio broadcast is being received.
The current reception information is shown on the display.
qNormal
↓
wFrequency / Signal strength
↓
eLong station name / Program and Program type
↓
rTitle name / Artist name
↓
tAlbum name / Genre name
NOTE
If the station signal weakens while receiving a digital broadcast (while “
” and text is displayed), the mode automatically switches to the analog reception mode (the reception frequency is displayed).
Because of this, the “
” indicator and text may flicker if the station signal level is weak and unstable.
nDefault settings
|
| Tuner presets | |
A1 | ~ A8 | 87.5 / 87.9 / 89.1 / 93.3 / 97.9 / 98.1 / 98.9 /100.1 MHz | |
B1 | ~ B8 | 101.9 / 102.7 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1 / 90.1 | |
MHz | |||
|
| ||
C1 | ~ C8 | 530 / 600 / 930 / 1000 / 1120 / 1210 / 1400 / 1710 kHz | |
D1 | ~ D8 | 90.1 MHz | |
E1 | ~ E8 | 90.1 MHz | |
F1 | ~ F8 | 90.1 MHz | |
G1 | ~ G8 | 90.1 MHz |
The music on an iPod can be played by using the Control Dock for iPod
The operation can also be performed using the buttons on the main unit or remote control unit while watching the GUI menus.
iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
b The iPod may only be used to copy or play contents that are not copyrighted or contents for which copying or playback is legally permitted for your private use as an individual. Be sure to comply with applicable copyright legislation.
Basic Operation
1Make the necessary preparations.
qSet the iPod in the DENON Control Dock for iPod.
(vSee the Control Dock for iPod’s operating instructions.) wAssign the Control Dock for iPod’s input.
: ”Source Select” – “(input source)” – “Assign”– ”iPod dock” (vpage 47)
2Either turn <SOURCE SELECT> or press [iPod] (AMP mode) to select the input source assigned in step
OK to disconnect 
(iPod screen)
bIf the screens above are not displayed, the iPod may not be properly connected. Try connecting again.
: ”Source Select” – “(input source)” – “Play” (vpage 44)
3To operate using the main remote control unit, set the remote control unit to the iPod mode.
(vpage 73 “Remote Control Unit Operations”)
•With the default settings, the iPod can be used connected to the VCR (iPod) connector.
•Use the RESTORER mode to expand the low and high frequency components of compressed audio files and achieve a richer sound. The default setting is “Mode3”.
•Press <ON/STANDBY> or [POWER OFF] and set the
NOTE
•Depending on the type of iPod and the software version, some functions may not operate.
•DENON will accept no responsibility whatsoever for any loss of iPod data.
Listening to Music
1Use ui to select the menu, then press ENTER or p to select the music file to be played.
2Press ENTER or p. Playback starts.
To pause
During playback, press ENTER or [1].
Press again to resume playback.
During playback, either press and hold u (to
To cue to the beginning of a track
During playback, either press u(to cue to the previous track) or i(to cue to the next track), or press [8] or [9].
To stop
During playback, either press and hold ENTER or press [2].
Playing repeatedly
Press [CHANNEL
[Selectable items] All One OFF
: ”Source Select” – “(input source)” – ”Playback Mode (iPod)” – “Repeat” (vpage 46)
Troubleshooting Information