Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

SOURCE SELECT Surround mode INPUT MODE

<ZONE2/3/4 / <PHONES>

REC SELECT>

[AMP]

Surround mode

INPUT MODE

SOURCE

SELECT

About the button names in these explanations

<> : Buttons on the main unit

[ ] : Buttons on the remote control unit

Button name only:

Buttons on the main unit and remote control unit

Other Operations and

Functions

Other Operations

Playing Super Audio CD

1Assign “DENON LINK” with the “Digital” setting or assign “HDMI” with the “HDMI” setting (vpage 46).

2Either turn <SOURCE SELECT> or press [SOURCE SELECT] to select the input source assigned in step 1.

The “” or “” indicator lights on the display.

3Select “AUTO” for the INPUT MODE (vpage 45).

4Select the surround mode (vpage 48 ~ 50). We recommend playing in the DIRECT mode.

5Start playing the Super Audio CD. The “” indicator lights on the display.

For operating instructions, refer to the respective equipment’s operating instructions.

•When playing DSD signals in the DIRECT or PURE DIRECT mode, the DSD signals are converted as such into analog signals. When playing in other surround modes, the DSD signals are first converted into PCM format, then into analog signals.

•“DSD DIRECT” is shown on the display when playing DSD 2-channel signals in the DIRECT mode. “DSD MULTI DIRECT” is shown on the display when playing DSD multi--channel signals in the DIRECT mode.

•The DSD signal may not be output depending on the equipment that is connected.For further details, refer to the user manual for the equipment being used.

Recording on an External Device (REC OUT mode)

You can listen to one program source while recording a different program source.

1Press <ZONE2/3/4 / REC SELECT>.

“ZONE3 SOURCE” is shown on the display.

2Turn <SOURCE SELECT> until “RECOUT SOURCE” is displayed.

The “” indicator lights.

ZONE3 SOURCE ZONE3 TUNER ···· ZONE3 HD Radio

RECOUT HD Radio RECOUT XM ···· RECOUT SOURCE

3Turn <SOURCE SELECT> to choose the input source to be recorded.

4Play the program source.

For operating instructions, refer to the respective equipment’s operating instructions.

To record FM or AM broadcasts, select the broadcast (vpage 57).

5Start recording.

For operating instructions, refer to the respective equipment’s operating instructions.

•To cancel, press <ZONE2/3/4 / REC SELECT>, then turn <SOURCE SELECT> until “ZONE3 SOURCE” is displayed.

•Make a test recording before starting the actual recording.

•Signals are only output to the analog REC OUT connectors when the digital signals input to the digital input connectors (OPTICAL/ COAXIAL) are PCM (2-channel) signals.

•Digital audio signals input to the DENON LINK or HDMI connectors are not output to the REC OUT connectors, so connect using the OPTICAL or COAXIAL connectors.

•Sources selected with the REC OUT mode are output from ZONE3 as well.

•In the REC OUT mode, the remote control unit’s ZONE3 mode buttons cannot be operated.

•When the “Digital Out” setting is set to “ZONE4 Select”, the OPTICAL4 output connector becomes the ZONE4 output. When using for recording, set to “Rec Select”.

•Copyright protected network audio (Internet radio, media server, USB and Rhapsody) signals cannot be output from the digital output connectors (OPTICAL).

69