
Troubleshooting Information
<STANDARD> <HOME THX CINEMA>QUICK SELECT
<POWER> CH SELECT uiop
QUICK SELECT
uiop
CH SELECT
Operations
1Connect the HDMI to the
2Put the power on for all the equipment connected to the HDMI.
3Check the settings for all the equipment connected to the HDMI and make HDMI available to them.
b Please consult the operating instructions for the connected equipment to check the settings.
b Operations 1 ~ 3 do not have to be repeated once started.
b Carryout Operations 2 and 3 should any of the equipment be plugged out.
4Switch the television input to the HDMI connected to the
5Switch the
6Put the television power on standby and check if the
If the
•Is the GUI menu “Manual Setup” – “HDMI Setup” – “HDMI Control”
–“Control” (vpage 32) set to “ON”?
•Is the GUI menu “Manual Setup” – “HDMI Setup” – “HDMI Control”
–“Control Monitor” (vpage 32) set for the monitor output connected to television?
•Is the GUI menu “Manual Setup” – “HDMI Setup” – “HDMI Control”
–“Power Off Control” (vpage 32) set to “ON”?
•Is the control function used for the television HDMI properly set? (Check the television operating instructions for details.)
•Should any of the operations below be performed, the interlocking function may be reset, in which case, repeat Operation's 2 and 3.
• GUI menu “Source Select” – (input source) – “Assign” – “HDMI” (vpage 46) setting has changed
• There is a change to the connection between the equipment and the HDMI, or an increase in equipment.
• Change of HDMI monitor output in
About the button names in these explanations
<> : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
71