Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

•Please set all THX Certified speakers, set the “Speaker Configuration” for all speakers to “Small”. We recommend using with the crossover frequency set to “FIXED–THX–”, but depending on the speaker, setting it to a different frequency may improve frequency response near the crossover frequency.

•The “Crossover Frequency” can be set when there are speakers that have been set to “Small” at GUI menu “Speaker Configuration” or when “Subwoofer” is set to “Yes” (vpage 29).

•At the “Advanced” settings, if the “Subwoofer Setup” (vpage

29)setting is set to “LFE–THX–”, GUI menu speakers for which “Speaker Configuration” is set to “Small” can be set. If set to “LFE+Main”, the setting can be made regardless of the speaker size.

•For speakers set to “Small”, sound below the crossover frequency is cut from the sound output. The cut bass sound is output from the subwoofer or front speakers.

hTHX Audio Setup

Set the speaker to play the optimal THX surround mode.

THX Ultra2 Subwoofer

Set when using a subwoofer compatible with THX Ultra2 standards or a subwoofer that can be properly played at low range.

[Selectable items]

Yes

 

No

 

 

 

 

Make these settings when “Yes” is selected for the subwoofer in the “Speaker Configuration” settings. This option is not available when “No” is selected (vpage 29).

BGC (Boundary Gain Compensation)

If bass sound feels big compensate by lowering volume.

[Selectable items]

ON

 

OFF

 

 

 

 

•If the bass sound seems too strong:

Set “BGC” to “ON”. This activates a filter that gently reduces very deep bass below 55 Hz to provide the flattest overall deep bass response. Select “ON” or “OFF” according to how strong you prefer the deep bass response to be.

•This can be set when the “THX Ultra2 Subwoofer” setting is set to “Yes”.

SB Speaker Position

Set the distance between the left and right surround back speakers.

[Selectable items] Under 1ft 1ft – 4ft Over 4ft

•When two surround back speakers have been set in “Speaker Configuration” (vpage 29), set the distance of the speakers. This option is not available when “1spkr” is selected.

•This setting is necessary to achieve the optimum effect in the THX Surround EX, THX Ultra2 Cinema, THX Music mode and THX Games mode.

jSurround Speaker

Select surround speakers to use for each surround mode.

THX/DOLBY/DTS Cinema

[Selectable items]

A

 

B

 

A+B

THX/DOLBY/DTS Music

[Selectable items]

A

 

B

 

A+B

 

 

 

 

 

 

THX/DOLBY Game

[Selectable items]

A

 

B

 

A+B

 

 

 

 

 

 

WIDE SCREEN

[Selectable items]

A

 

B

 

A+B

 

 

 

 

 

 

7CH STEREO

[Selectable items]

A

 

B

 

A+B

DSP SIMULATION

[Selectable items]

A

 

B

 

A+B

 

 

 

 

 

 

MULTI CH MODE

[Selectable items]

A

 

B

 

A+B

 

 

 

 

 

 

Operating from the main remote control unit

Press the SPKR button.

Surround A Surround B

Surround A+B

•This can be set when GUI menu “Speaker Configuration” – “Surround A” and “Surround B” are used (vpage 29).

•Make the surround speaker settings when the input mode is set to “EXT. IN” at GUI menu “Manual Setup” – “Audio Setup” – “EXT. IN Setup” (vpage 33).

About Speaker Type Setting when Using Both Surround speakers A and B

If “Small” is set for either surround speakers A or B, the output is the same as when “Small” is set for both A and B.

31