POA 1/POA 2

Set POA-A1HDCI for which the MODE select switch is set to “1” or “2”.

See the POA-A1HDCI operating instructions.

nInput Selector

Select the setup channel.

[Selectable items] L1 R1 L2 R2 L3 R3

Mute Level

This sets the amount of attenuation of the volume when the mute mode is set in the MAIN ZONE.

[Selectable items] Full –40dB –20dB

gSource Delete

Remove input sources that are not used from the display.

Operating from the main unit

bThe GUI menu is not displayed when performing this setting.

qPress and hold the AUDIO DELAY and RETURN buttons for at least 3 seconds.

“Video Format” appears on the display.

wUse the o p button to make the setting.

e Press the ENTER, MENU or RETURN button to complete the setting.

Connections Started Getting

L4 R4 L5 R5

Select the connector input to be used for each channel.

[Selectable items]

RCA

 

XLR

 

OFF

nPower Amp

Select the setup channel.

[Selectable items] L1/L2 L3/L4 L5/R5 R1/R2 R3/R4

Set the power amp usage for each channel.

[Selectable items] NORMAL BI-AMP BRIDGE (BTL)

LINK Check

Check CONTROL LINK.

[Selectable items] ON Delete

NOTE

•Input sources being used in the various zones cannot be deleted.

•Input sources set to “Delete” cannot be selected from GUI menu “Source Select” or using the SOURCE SELECT knob on the main unit or SOURCE SELECT button on the remote control unit.

hGUI

Make GUI related settings.

Screensaver

Make screensaver settings.

Use the screensaver to prevent burn-in on the monitor screen. When set to “ON”, the screensaver is activated if there is no activity for about 3 minutes.

Text

Text information display.

[Selectable items]

ON

 

OFF

Master Volume

Master volume display during adjustment.

[Selectable items]

ON

 

OFF

 

 

 

 

NET/USB / iPod / Tuner

This sets the time the on-screen display is displayed when an operation is performed.

[Selectable items]

Always

 

30s

 

10s

 

OFF

Information Zone-Multi Control Remote Playback Setup

fVolume Control

Set the MAIN ZONE volume setting.

Volume Limit

Make a setting for maximum volume.

[Selectable items] OFF –20dB –10dB 0dB

Power On Level

This sets the volume set when the MAIN ZONE’s power is turned on.

[Selectable items]

Last

 

– – –dB

 

–80dB ~ 18dB

[Selectable items]

ON

 

OFF

Wall Paper

Change the GUI background.

[Selectable items] Picture Black Gray Blue

Format

Select the video output signal format to match the monitor.

[Selectable items] NTSC PAL

NOTE

When a format other than the video format of the connected monitor is set, the picture will not be displayed properly. Use the procedure described below to change the video format.

jQuick Select Name

Change “Quick Select” display name.

Up to 16 characters can be input.

[Input characters]

A ~ Z a ~ z 0 ~ 9 ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space)

Troubleshooting

40