&Gn Guard Tone Operation

Determines which guard tone, if any, to transmit while transmitting in the high band (answer mode). Used only in V.22 and V.22bis mode.

*&G0: No guard tones.

&G1: 550 Hz guard tone.

&G2: 1800 Hz guard tone.

Result Codes:

OK

Returned when n = 0, 1 or 2.

ERROR Returned for any other value of n.

&Jn Dummy Command for AutoSync

Dummy command for AutoSync compatibility.

&J0: Returns OK.

&J1: Returns OK.

&Kn Set Flow Control

Determines which guard tone, if any, to transmit while transmitting in the high band (answer mode). Used only in V.22 and V.22bis mode.

&K0: Disable flow control.

&K1: Reserved.

&K2: Reserved.

*&K3: Enable bi-directional hardware flow control (RTS/CTS).

&K4: Enable bi-directional XON/XOFF flow control.

&K5: Error.

Result Codes:

 

OK

Returned when n = 0, 3 or 4.

ERROR

Returned for any other value of n.

&Ln Dial-Up/Leased-Line Option

Selects between dial-up and leased-line operations. NOTE: Full-featured leased line operation is not available at this time. Please call Digi Sales for more information.

*&L0: Dial line.

&L1: Leased line.

Result Codes:

 

OK

Returned when n = 0 or 1.

ERROR

Returned for any other value of n.

106

T1 Modem Bank

Page 116
Image 116
Digi 90031300 Gn Guard Tone Operation, Jn Dummy Command for AutoSync, Kn Set Flow Control, Ln Dial-Up/Leased-Line Option