Digi 90031300 manual Data Bit Order Selection, Copy Quality Checking, Capability to Receive

+FBOR Data Bit Order Selection.

Command syntax: +FBOR=<value>

0:Direct bit order for both Phase C data and Phase B/D data.

1:Reversed bit order for Phase C data and direct bit order for Phase B/D data.

2:Direct bit order for Phase C data and reversed bit order for Phase B/D data.

3:Reversed bit order for both Phase C data and for Phase B/D data.

Note:

Direct bit order: First bit transferred of each byte on the DTE-DCE link is the first bit transferred in the PSTN data carrier.

Reversed bit order: Last bit transferred of each byte on the DTE-DCE link is the first bit transferred in the PSTN data carrier.

+FCQ Copy Quality Checking

Command syntax: +FCQ=<value>

0:Disables copy quality checking. The modem will generate Copy Quality OK (MCF) responses to complete pages and set +FPTS=1.

+FCR Capability to Receive

Command syntax: +FCR=<value>

0:Indicates the modem will not receive message data.

1:Indicates the modem can receive message data.

+FCTCRTY ECM Retry Count

Command syntax: +FCTCRTY=<value>

0:Disable error correcting mode retries. Error correcting mode is not supported.

Appendix F 121