&Xn Sync Transmit Clock Source

Determines how the DTE transmit clock is generated while the modem is in synchronous modes.

*&X0: The modem generates the transmit clock and applies it to pin 15 (EIA-232).

&X1: The DTE generates the transmit clock on pin 25 (EIA-232) and the modem applies it to pin 15 (EIA-232)

&X2:

The modem derives the transmit clock from the receive carrier signal and applies it to pin 15

 

(EIA-232).

Result Codes:

OK

Returned when n = 0, 1 or 2.

ERROR

Returned for any other value of n.

&Yn Select Stored Profile on Powerup

Selects which user profile will be recalled into the active profile when the modem is powered up.

&Y0:

Select user profile 0.

&Y1:

Select user profile 1.

Result Codes:

OK

Returned when n = 0 or 1.

ERROR

Returned for any other value of n.

&Zn=x Store Telephone Number

Stores a dialing string x in one of four non-volatile memory locations n. Dialing strings can be up to 36 characters long, including dial modifiers; spaces are not counted.

n=0-3

x=0-9, A, B, C, D, #, *, T, P, R, W, @, comma, !, ; (dial string)

110

T1 Modem Bank

Page 119 Page 121
Page 120
Image 120
Digi 90031300 manual Xn Sync Transmit Clock Source, Yn Select Stored Profile on Powerup, Zn=x Store Telephone Number
Page 119 Page 121
Top Page Image Contents