Digi 90031300 manual Compression Class, Compression V.42bis

56CARRIER 24000

The modem sends this result code when the channel carrier in V.34 mode has been detected on the line, and carrier reporting has been enabled.

57CARRIER 26400

The modem sends this result code when the channel carrier in V.34 mode has been detected on the line, and carrier reporting has been enabled.

58CARRIER 28800

The modem sends this result code when the channel carrier in V.34 mode has been detected on the line, and carrier reporting has been enabled.

59CARRIER 31200

The modem sends this result code when the channel carrier in V.34 mode has been detected on the line, and carrier reporting has been enabled.

60CARRIER 33600

The modem sends this result code when the channel carrier in V.34 mode has been detected on the line, and carrier reporting has been enabled.

66COMPRESSION: CLASS 5

This message is sent to the DTE when the modem has connected in MNP Class 5, and COMPRESSION message reporting has been enabled.

67COMPRESSION: V.42bis

This message is sent to the DTE when the modem has connected in V.42bis data compression, and COMPRESSION message reporting has been enabled.

69COMPRESSION: NONE

This message is sent to the DTE when the modem has connected without data compression, and COMPRESSION message reporting has been enabled.

70PROTOCOL: NONE

This message is sent to the DTE when the modem has connected without any form of error correction, and the PROTOCOL message reporting has been enabled.

77PROTOCOL: LAP-M

This message is sent to the DTE when the modem has connected in the V.42 LAPM mode of error correction, and PROTOCOL message reporting has been enabled.

80PROTOCOL: MNP

This message is sent to the DTE when the modem has connected in the MNP mode of error correction, and PROTOCOL message reporting has been enabled.

81PROTOCOL: MNP 2

This message is sent to the DTE when the modem has connected in the MNP mode of error correction, and PROTOCOL message reporting has been enabled.

82PROTOCOL: MNP 3

This message is sent to the DTE when the modem has connected in the MNP mode of error correction, and PROTOCOL message reporting has been enabled.

Appendix F 147