Class 2 FAX Commands

+FAA=n FAX Auto Answer Enable

Command Syntax: +FAA=<value>

0:Answer as FAX modem of type specified by +FCLASS.

1:Automatically determine whether to answer as FAX or data modem.

+FAXERR T.30 Session Error Report

Command syntax: +FAXERR

Response syntax: +FAXERRR=<value>

0-9 Call placement and termination.

0:Normal and proper end of connection.

1:Ring detected without successful handshake.

2:Call aborted, from +FK or <CAN>

10-19 Transmit Phase A & miscellaneous errors. 20-39 Transmit Phase B hang-up codes.

20:Unspecified transmit Phase B error.

23:COMREC invalid command received.

25:DCS sent 3 times without response.

27:Failure to train.

40-49 Transmit Phase C hang-up codes.

40: Unspecified transmit Phase C error.

50-69 Transmit Phase D hang-up codes.

52:No response to MPS repeated 3 times.

53:Invalid response to MPS.

54:No response to EOP repeated 3 times.

55:Invalid response to EOP.

56:No response to EOM repeated 3 times.

57:Invalid response to EOM.

70-89 Receive Phase B hang-up codes.

90-99 Receive Phase C hang-up codes.

90: Unspecified receive Phase C error.

100-119 Receive Phase D hang-up codes. 100:Unspecified receive Phase D error.

120-255 Reserved codes.

120

T1 Modem Bank

Page 130
Image 130
Digi 90031300 manual Class 2 FAX Commands, +FAA=n FAX Auto Answer Enable, +FAXERR T.30 Session Error Report