Digi 90031300 manual Supported FAX Transmit/Receive Modulations, 121, 122, 145, 146

Table 9			Supported FAX Transmit/Receive Modulations
	n	Modulation		Speed (Bits/Second)
	3	V.21 ch. 2		300
	24	V.27terbo		2400
	48	V.27terbo		4800
	72	V.29		7200
	73	V.17LT		7200
	74	V.17ST		7200
	92	V.17terbo 192 LT		19200
	93	V.17terbo 192 ST		19200
	96	V.29		9600
	97	V.17LT		9600
	98	V.17ST		9600
	121	V.17LT		12000
	122	V.17ST		12000
	145	V.17LT		14400
	146	V.17ST		14400

+FRM=? FAX Normal Mode Receive Capabilities

Causes the modem to output the receive modulations supported by the modem. See Table 9.

+FRM=n Modem Accept Training

Causes the modem to accept training with n type modulation and the protocol is normal mode. Table 9 shows the values you can enter for this command and the meaning of those values.

Returns CONNECT or 1 to DTE after carrier is detected.

+FTH=? FAX SDLC Mode Transmit Capabilities

Causes the modem to output the FAX SDLC transmit capabilities supported by +FTM=?. See Table 9.

+FTH=n Modem Initiate Training (SDLC)

Causes the modem to initiate training with n type modulation and the protocol is SDLC mode. Table 9 shows the values you can enter for this command and the meaning of those values.

Returns CONNECT or 1 to DTE after carrier is detected.

+FRH=? FAX SDLC Mode Receive Capabilities

Causes the modem to output the FAX SDLC receive capabilities supported by +FTM=?. See Table 9.

+FRH=n Modem Accept Training (SDLC)

Causes the modem to accept training with n type modulation and the protocol is SDLC mode. Table 9 shows the values you can enter for this command and the meaning of those values.

Returns CONNECT or 1 to DTE after carrier is detected.

Appendix F 119