Digi 90031300 manual Physical Specifications, T1 Modem Bank Power Cord Specifications

Physical Specifications

T1 Modem Bank Power Cord Specifications

The chassis has a 3-wire power cord. The free end of the 3-wire power cord connects to the 110 VAC (domestic) power source and protective ground. NEMA plug type 5/15P is used for US installations.

The North American cordset is rated 15A/125V, and is UL/CSA approved.

A T1 Modem Bank sold in North America is shipped with a standard power cord. Units sold outside of North America are shipped without a power cord. If the power cord needs to be replaced, or if you need to purchase an original power cord, use only a cord that meets the following specifications:

Type: SJT or SVT flexible power cord, compatible with an IEC320 appliance inlet. Safety Approvals:

The cord must bear the mark of the agency in your country (such as UL, CSA, VDE, SEMKO, and so on).

Temperature Rating: 75°C minimum

Voltage Rating:

125 Volts minimum (North America) Current Rating:

15 Amps maximum Conductor Size:

3 x 18 AWG or 3 x 0.75 mm, or larger

For power cord selection in Germany, use only a H05VV-F, <HAR>, VDE, PVC, 3 x 0.75mm power cord.

Für gebrauch in Deutschland muß ein Netzkabel des typs H05VV-F, <HAR>, größe, 3 x 0.75mm verwendet werden.

Physical Specifications 79