Digi 90031300 manual Class 2 FAX Responses

Class 2 FAX Responses

+FCFR	Indicate Confirmation to Receive.
Syntax:	+FCFR
Usage:	Indicates the reception of an acceptable TCF training burst and valid DCS signal from the remote
	machine.

+FCON	Facsimile Connection Response.
Syntax:	+FCON
Usage:	Indicates connection with a FAX machine. Generated in response to an originate command or
	answer command.

+FCSI	Reports the Remote ID.
Syntax:	+FCSI:”<CSI ID string>”
Usage:	Reports the Called Station’s ID.
+FDCS	Reports DCS Frame Information.
Syntax:	+FDCS:VR,BR,WD,LN,DF,EC,BF,ST
Usage:	Reports negotiated parameters for the current session. The subparameters are described in the
	+FDCS command description.
+FDIS	Reports DIS Frame Information.
Syntax:	+FDIS:VR,BR,WD,LN,DF,EC,BF,ST
Usage:	Reports remote FAX capabilities and intentions. The subparameters are described in the +FDCS
	command description.
+FET	Post Page Message Response.
Syntax:	+FET:<ppm>
Usage:	Generated by the receiving modem after the end of Phase C reception, on receipt of the post-page
	message from the transmitting station. The <ppm> codes are described in the +FET command
	description.
+FHNG	Call Termination with Status.
Syntax:	+FHNG:<hangup status code>
Usage:	Indicates that the call has been terminated. The <hang-up status code> values are described in the
	+FAXERR command description.
+FPTS	Receive/Transmit Page Transfer Status.
Syntax:	+FPTS:<ppr>
Usage:	Reports a <ppr> number representing the copy quality and related post-page message. The valid
	<ppr> values are defined in the +FPTS command description.
+FTSI	Report the Remote ID.
Syntax:	+FTSI:"<TSI ID string>"
Usage:	Reports the transmitting station’s ID.

Appendix F 127