Digi 90031300 manual Below 1 Megabyte, Above 1 Megabyte

6.Place the cursor on “ Dual-Ported Mem Address” and press <Enter>. A screen similar to the following will appear:

The following address choices are available:

Below 1 Megabyte:*
80000h	88000h	90000h	98000h
A0000h	A8000h	B0000h	B8000h
C0000h	C8000h	D0000h	D8000h
E0000h	E8000h	F0000h	F8000h

Above 1 Megabyte:

F0000000h F1000000h F2000000h F3000000h

F4000000h F5000000h F6000000h F7000000h

F8000000h F9000000h FA000000h FB000000h

FC000000h FD000000h FE000000h FF000000h

*Although there are 16 choices offered for memory start addresses below 1 megabyte, a limited number of these choices is likely to be available. Of the 16, the best choices are probably D0000 and D8000. See Appendix A on page 85 for more information.

Multiple EISA EPC/X host adapters may share the same addresses.

7.Use the cursor keys to select one of the listed addresses, or press <Enter> to accept what the configuration pro- gram has chosen. Write this address down—you will need to know it when installing the device driver soft- ware.

8.Leave the Dual-Port Mem Enbl/Dsbl at “ Disabled”.

9.Leave the Interrupt Configuration at “ Disabled”.

10.Pull down the SYSTEM menu, and choose “ Exit”. Make sure that you SAVE the new configuration as the program suggests.

11.Go to “Connecting the EPC/X Host Adapter to the T1 Modem Banks” on page 25.

24 T1 Modem Bank