Digi MIL-3000FTX manual Maximum Retry Time and click Next. Default is, 2.1General Parameters

•Maximum Retry Time and click Next. Default is 5.

Figure 8-2. Configuring Advanced Parameters

8.2.2.1General Parameters

The “General Parameters” has more options to configure.

Figure 8-3. General Parameters

•Show Node Name: If selected, this parameter displays a host name for all the devices discovered. FastManage needs a hosts file in the C:\ETC directory for a host name to be displayed. Checked by default.

•Show Node Address: If this selection is checked, FastManage displays IP and IPX addresses for all the devices discovered. Not checked by default.

•Load Saved Maps: If this parameter is selected, the software loads the saved Map when starting the Discovery Application. Checked by default.

MIL-3000FTX Series of FastPort Print Servers 8-4