Digi MIL-3000FTX manual Select BOOTPtab File

Figure 11-5. Select BOOTPtab File

4.To add a new entry to the “BOOTPtab” file, click Add Entry to BOOTPtab File from the “File” pull-down window.

Figure 11-6. Add Entry to BOOTPTab File

To add a node with an Ethernet address of “0040C8XXXX02” and an IP address of “199.86.11.1,” enter 00.40.C8.XX.XX.02 in the “Hardware Address” box, and 199.86.11.1 in the “IP Address” box.

Note: The host name is user selectable.

5. Click Ok.

Add entries for each field.

MIL-3000FTX Series of FastPort Print Servers 11-3