8.At the next prompt, type in the IP address as such:

Enter new IP address: 204.23.13.4

9.At the next prompt, press [R] to reset the system.

The nbmon session closes, while FastPort reboots itself. When the system comes back up, the LEDs blinks steady (1 second manner). This indicates that FastPort now has an IP address set.

2.11 Verifying IP Address is Set Properly

To see if FastPort is up and running on the network, use the ping command, type: ping <hostname>. A message that the host is alive appears. If there is a problem, try using ping with the IP address:

ping <ip-address>

On some systems, the ping command continuously displays:

64 bytes from <hostname> (192.115.2.1) icmp_seq=0 time=3ms

To discontinue ping, press the Del key or Control+C

MIL-3000FTX Series of FastPort Print Servers

2-10

Page 25
Image 25
Digi MIL-3000FTX manual Verifying IP Address is Set Properly, Enter new IP address