Digi manual MIL-3000FTX Series of FastPort Print Servers

9.Verify normal boot-up. The unit performs POST (power-on self-test) at start-up and tries to resolve its IP addresses:

–If the IP address is set, the SYS LED blinks once per second.

–If the IP address is not set, the SYS LED blinks five times per second until the address is set either manually or by using RARP, BOOTP, or DHCP.

FastPort should now be functioning on the network

MIL-3000FTX Series of FastPort Print Servers 1-6