5.6 Installing and Printing from Data General's DG/UX

FastPort supports DG/UX™ 5.4 Release 2.01 and above. Current versions of DG/UX fully support FastPort; meaning that an interface script or filter command do not need to be loaded. These files are:

/usr/lib/lp/bin/fpfilter

/usr/lib/lp/model/fastport

5.6.1Assigning Host Name and IP Address

Use the sysadm to add FastPort’s IP/Ethernet address, via:

Networking -> TCP/IP -> hosts -> Add

1.Add FastPort to the local hosts database (/etc/hosts) or the Network Information Services (NIS).

e.g., Host name: fastport2-pr

2.Add the Internet address that the system admin. assigned. e.g., Internet Address: 128.222.55.55

3.Add an alias (optional). Or press [Enter] to continue.

e.g., Alias List: <press Enter>

4. Confirm the choices.

OK to perform operation? [yes]. Press [Enter]. fastport2-pr has been added

5.Add an Ethernet address by modifying the local ethers database (/ etc/ethers) or the NIS ethers database. Follow the ensuing path:

Networking -> TCP/IP -> Ethers -> Add

6.Enter the name of the host that was specified in Step 1.

Host Name: fastport2-pr

7.Enter the FastPort’s Ethernet address:

Ethernet Address: 00:40:c8:55:55:55

8. Confirm the choices.

OK to perform operation? [yes]. Press [Enter]. fastport2-pr has been added.

MIL-3000FTX Series of FastPort Print Servers

5-16

Page 62
Image 62
Digi MIL-3000FTX manual Installing and Printing from Data Generals DG/UX, Assigning Host Name and IP Address