Figure 11-4. Update Settings Menu

2. Change the time-out setting (in milliseconds).

Note: A value of up to 32,000 milliseconds can be entered.

3.Click OK.

11.2Troubleshooting Ping

If a device does not respond to a ping command:

Make sure that you entered the correct IP address in the ping command line.

Make sure the device was assigned the correct IP address.

Physically make sure the device is setup correctly.

11.3BOOTP Configuration

The BOOTP application implements a BOOTP server, which allow users to assign IP addresses dynamically to devices on the network. Digi’s network devices implement BOOTP and can obtain an IP address from BOOTP.

BOOTP looks for the right entry containing the IP and hardware address of the device. To launch the BOOTP server in Windows:

1.Double-click on the BOOTP Server icon.

2.Figure 11-3 may appear. Select “Browse” to find this file.

3.BOOTP needs a “BOOTPtab” file (usually in the /etc directory) to operate. Digi provides an empty BOOTPtab file with FastManage. When this file appears in the field, click OK to continue. The “BOOTP Server” menu appears.

MIL-3000FTX Series of FastPort Print Servers

11-2

Page 110
Image 110
Digi MIL-3000FTX manual Troubleshooting Ping, Bootp Configuration