Digi MIL-3000FTX manual Appendix E Troubleshooting AppleTalk, Appendix F Upgrading Flash EEPROMs

No Lights on the Unit	D-1
ASCII Text File Prints as a Single Line	D-1
SYS LED Flashes Quickly	D-2
Cannot Print to the serial printer	D-2
NET LED flashes, But User Cannot Print or Ping the Unit	D-2
UNIX Configuration Files	D-3
Using fpfilter Configuration Files	D-3
Sample Entries for Direct and Remote Spooling	D-4
DHCP Troubleshooting	D-4

Appendix E: Troubleshooting AppleTalk

Troubleshooting Tips	E-1
Reset Time	E-1
Configuration to Use the ACK Signal	E-1
Situation 1: Printing Over Ethertalk Using Driver 7.x	E-1
Situation Two: Setting Serial Port Options	E-2
Setup for AppleTalk	E-3
For a Serial Printer	E-3
PostScript Binary print	E-4
Troubleshooting	E-4
Changing the FastPort Settings	E-4
Troubleshooting Setup on AppleTalk	E-5
More Troubleshooting	E-6
Downloading the Setup Defaults File to Change FastPort	E-7

Appendix F: Upgrading Flash EEPROMs

Using the Network Upload Procedure	F-1
Uploading the Flash Image	F-1
Recovering from a Failed Upload	F-1
Restoring the Alternate Bank Image	F-2
Completing the Upload	F-2
Flash Upload Commands	F-3
Troubleshooting Tips	F-3

Appendix G: Telnet, NBMON and Serial Connection Diagnostic Console Options

Diagnostic and Configuration Commands: Commands	G-1
C—Configure Console (for status monitoring)	G-1
D—Display Summary Configuration Parameters, Including	G-2
E—Display/Set Ethernet Options	G-2
F—Flash Firmware Load Enable/Disable	G-2
I—Display/set IP Address	G-3
L—Limit monitor Network Access by Password	G-3
N—Network Protocols Menu	G-3
Network Protocols Menu:	G-3
A—AppleTalk Options	G-3
M—Microsoft Windows Print Services Options	G-4
N—Netware Options	G-4
T—TCP/IP (Sockets, LPD, RARP, BOOTp, TFTP) Options	G-5
TCP/IP Menu Options: (S) Socket Options	G-5
TCP/IP Menu Options: (L) LPD Options	G-6
P—Display/Set Parallel Port Parms and Status	G-6
Display/Set for MIL-3200FTX	G-6
Display/Set for MIL-3110FTX and MIL-3111FTX,.............................................................G-7
S—Display/set Serial Port Parms	G-7
Z—Reset NVRAM to Factory Defaults	G-8

MIL-3000FTX Series of FastPort Print Servers viii