Digi MIL-3000FTX manual Appendix B Troubleshooting MS Windows, Appendix C Troubleshooting NetWare

Serial Printer and Terminal	A-2
Connectors	A-3
Serial Port Connector	A-3
RJ-45 Connector	A-3
Parallel Port Connector	A-3
Environmental Operating Conditions	A-3
System LEDs	A-3

Appendix B: Troubleshooting MS Windows

MS Windows-Level Browsing and Sharing Abilities	................................................................................B-1
Troubleshooting DOS Tools	B-2
DOS Tools	B-2
After Upgrade	B-2

Appendix C: Troubleshooting NetWare

ACT-- Advance Configuration Tool	C-1
Benefits of ACT	C-1
Features	C-1
Requirements	C-2
Setup	C-2
Navigating in ACT	C-2
Advanced Configuration Menu in ACT	C-2
NetWare Configuration Menu	C-3
Configuring the Print Server (FastPort Side)	C-3
Configuring the Print Server (File Server Side)	C-4
Configuring a Queue	C-4
Example 1	C-4
Example 2	C-5
Print Server Configuration	C-5
Status Menu in ACT	C-7
Monitor Menu in ACT	C-7
Troubleshooting Tips	C-8
FastPort does not power up	C-8
FastPort does not show up in ACT	C-8
FastPort fails POST after upgrading firmware	C-8
FastPort does not login to bindery Novell 4.x server	C-8
FastPort does not login to the file server	C-9
FastPort does not print via serial port	C-9
No Form Feed is sent after the print job	C-9
PostScript jobs have trouble printing	C-9
Autosensing printer has trouble printing	C-10
MS Windows jobs print with an extra page	C-10
File server displays an Incomplete Packet error message	C-10
Notification not Working if Created by PCONSOLE	C-10
FastPort Console Messages	C-10
Could not attach QUEUE1	C-10
Attaching queue QUEUE1 on server SERVER1	C-10
Read Configuration File	C-10
Could not Read Configuration file from SERVER1	C-11
Trying to read file SYS:login/milan/FPXXXXXX on SERVER1	C-11
No such object FAKEQ	C-11
Failed to login to file server SERVER1 for server FAKEPS	C-11
ACT Error Messages	C-11

Appendix D: Troubleshooting UNIX

Introduction	D-1
Troubleshooting Tips	D-1

MIL-3000FTX Series of FastPort Print Servers vii