Digi MIL-3000FTX manual Notification not Working if Created by Pconsole, FastPort Console Messages

C.5.9 Autosensing printer has trouble printing

•Check the job time-out value and increase it 45 to 60 seconds.

•Turn off banner option.

•Use ACT to select the send a Control+D queue option (see NetWare Configuration). This resets the printer after a PostScript job.

C.5.10MS Windows jobs print with an extra page

Use Print Manager or the Windows Printer Setup screen to turn off the send a form feed option.

C.5.11File server displays an Incomplete Packet error message

By default, FastPort finds NetWare servers using repeated broadcasts of different frame types. If a server is bound to a specific frame type, the server issues error messages for frames it does not understand. Use the Advanced Configuration menu in ACT to set a specific frame type.

C.6 Notification not Working if Created by PCONSOLE

Verify that the printer type is Defined Elsewhere and not any other type. Select the Print Servers menu and change the settings in the Printers submenu.

C.7 FastPort Console Messages

This section lists and describes FastPort console messages.

C.8 Could not attach QUEUE1

Verify that the queue name is spelled correctly and whether another print server is servicing QUEUE1.

C.8.1 Attaching queue QUEUE1 on server SERVER1

FastPort has read the configuration file and has attached to the queue that asked to be serviced.

C.8.2 Read Configuration File

FastPort has found and read the configuration file. It then displays it as verified.

MIL-3000FTX Series of FastPort Print Servers C-10