Digi MIL-3000FTX manual Select Apple Printer Utility

15.Double-click on Apple Printer Utility 2.2 or the older

LaserWriter Utility 7.6.2 for driver 8 (LaserWriter Utility 7.2 for Driver7).

16.Close the utilities and the Digi Technology AT Utilities x.x folder.

17.Click and hold Finder (upper right hand corner).

18.Select Apple Printer Utility.

19.Click and hold Utilities.

20.Select Download Postscript File....

21.Click on SetUp Defaults file, Open, and Save.

A message saying “no output to printer” appears, (rewrite...files or printing is bad). If “Cancel” or “Replace” appears, select

Replace.

22.To conclude, select Apple -->Chooser -->LaserWriter Driver 7

(8) and print the appropriate Setup file to a FastPort's -par1 parallel queue.

23.Ignore any message about inability to print to a spooler

The following is used to see if the download was successful:

1.Apple -->Chooser -->LaserWriter Driver 8 only

2.Select SetUp Printer Info and Update Info.

3.Exit program

MIL-3000FTX Series of FastPort Print Servers E-8