Digi MIL-3000FTX manual FastPort Icon Names, Tool bar, Status Bar, System Information

9.2.1 Tool bar

The tool bar displays above the Map field. Figure 9-3 displays a close-up view of the Discovery Application tool bar. To remove the tool bar from the field: From the “Option” pull-down menu, deselect Tool bar.

Open Rename

map map

Send

broadcast

Discover TFTP host

Node

properties

New	Save	View as	Refresh Ping	Close all	Help
map	map	host name or	map	windows
		IP address

Figure 9-3. Discovery Application Tool bar

9.2.2 Status Bar

By default, the “Status Bar” displays below the Map field (Figure 9-2). This displays current information, including:

•Searching...: Means the software is looking for more SNMP hosts over the subnet.

•XX Host: Number of hosts found.

•XX Dead: Number of host found that were off-line.

•Type of device found, for example, FastPort Network Print Server Model 3000FTX.

To remove the status bar from the field: From the Option pull-down menu, deselect Status bar.

9.2.3 System Information

Click once on a thumbnail. The object selected is highlighted with a box. Click on the same object once again and its system information appears.

9.3 FastPort Icon Names

The name or address of a host is displayed below the device in the Map (Figure 9-2). Names are based on certain criteria:

•FPXXXXXX: This device was discovered by the SNMP over IPX protocol (where XXXXXX are the last six digits of the Ethernet address. Thus, a device with an Ethernet address of “0040C800702CA,” has an IPX SAP name of FP0702CA).

MIL-3000FTX Series of FastPort Print Servers 9-3