Digi MIL-3000FTX manual Adding Queues in DigiLpr, Add New Queue Menu

3.2.5.2 Adding Queues in DigiLpr

To create a print queue:

1.Double-click on the LPR Utility icon. In the “Queues” pull-down window, click Add New Queue.

Figure 3-4. Add New Queue Menu

2.In the “Add a new queue” menu, fill in FastPort’s host name or its TCP/IP address. Choose from the list of Print Queues on the FastPort.

Note: Digi recommends that you use the default queue raw_p1. The _p1 designates parallel port #1. If you are using a serial port on the print server, the ending would be _s1 as in “raw_s1.”

Figure 3-5. Essential Setup Information Menu

3.In the next field, select the name for the printer port. Digi recommends using a port name of six characters or less.

4.Click once on the Add button to add the queue created.

5.The DigiLpr window appears displaying the queue created.

MIL-3000FTX Series of FastPort Print Servers 3-10