Digi MIL-3000FTX Display/set Serial Port Parms, 1.1Display/Set for MIL-3110FTX and MIL-3111FTX

<enter> (don't change/continue)

G.9.1.1Display/Set for MIL-3110FTX and MIL-3111FTX,

Current Parallel port config.:

mode	setup (us)strobe (us)console/test page
Fast-DMA	3	3	PostScript

Parallel port mode: 1.(Standard) 2.(Fast-DMA) 3.(AutoStrobe) 4.(Use-Ack)

<enter> (don't change/continue)

Number of us data setup			(default=3, max = 16)
Number of us strobe delay (default=3, max = 16)
Parallel console/test page
1.(PostScript)
2.(Ascii text)
<enter> (don't change/continue)
New Parallel port config.:
mode	setup (us)strobe (us)console/test page
Fast-DMA	3	3	PostScript

Select parallel console/test page type: 1.(PostScript)

2.(Ascii text)

<enter> (don't change/continue) New Parallel port 1 config.:

mode	setup/strobe (us)console/test page
Standard	2.7	PostScript

G.10 S—Display/set Serial Port Parms

Current

Serial port 1 config:BaudDataStopParityFlow

96008 1 NoneXon/Xoff

Modify?, yes or no (y or n)?:n

MIL-3000FTX Series of FastPort Print Servers G-7