Digi manual MIL-3000FTX Series of FastPort Print Servers

•Show Node Name: When this option is selected, the software displays host names for all the devices discovered. Checked by default.

•Show Node Address: When this parameter is chosen, FastManage displays IP and IPX addresses for all the devices discovered. Not checked by default.

•Load Saved Maps: When this option is selected, FastManage loads a saved Map when starting the Discovery Application. Checked by default.

•Save Maps On Exit: When selected, this option saves the Map when Discovery is exited. Checked by default.

•Save Parameters On Exit: This selection saves the options when the Discovery is exit. Checked by default.

•Refresh every: When chosen, this option refreshes the Map every <n> seconds. Default is 60 seconds.

•Discover: When this parameter is selected, the software re-discovers hosts every <n> seconds. Default is 90 secs.

•Dead: This parameter signifies the number of attempts FastManage tried before marking the node as “dead” (off-line). Default is 2 unicasts.

•Wait: The selection denotes the amount of time the software waits for a reply from a node. Default is 1 second.

•Default Map: This parameter selects the name of the default Map file: map.map.

•Map File: This parameter enters the path for the Map file. Default is

C:/fm.

•Hosts File: This parameter enters the path for the hosts file. Default is C:/ETC.

•Bootptab File: This selection enters the path for the bootptab file. Default is C:/FM.

•Allow To Edit “Hosts” File: When this parameter is selected, the software updates the “hosts” file if a new host is discovered. Checked by default.

•Default: Initialize all the parameters to default values.

•Save Options: Saves all changes to the issnmp.ini file.

•Cancel: Cancels the changes.

MIL-3000FTX Series of FastPort Print Servers 9-9