Digi MIL-3000FTX manual Discovery Application Messages, Ping Application Message

The address contains one field with value	A valid IP address is in the form of a.b.c.d, where a.b.c.d can
more than 255. Not all fields are defined	vary from 0 to 255. For example: 193.25.86.214
Host name appears as blanks	Create hosts file with a vertical list of host names:
	“hostname space IP” or <host name> <IP address>

H.4 Discovery Application Messages

Table H - 4: Discovery Application Messages

Message	Solution
IP, IPX, and NetBIOS Discovery are disabled. For	Valid Values are:
Discovery to work, at least one of them should be	IP=YES or IP=NO
enabled. Please update SNMP section, IP/IPX entries of	IPX=YES or IPX=NO,
issnmp.ini file. Discovery will exit now	NetBIOS=Yes or NetBIOS=No
Unable to open file (bitmap file)	The FastManage installation may be bad. Reinstall
Unable to copy palette for the bitmap	The FastManage installation may be bad. Reinstall
Unable to create bitmap from file DIB	The FastManage installation may be bad. Reinstall
No such pathway or drive is not ready	Restart Windows

H.5 Ping Application Message

Table H - 5: Ping Application Message

Message	Solution
IP is disabled in the file issnmp.ini. IP needs to be enabled	Enable IP discovery in the Discovery
for this application to run. This application will exit now	Application to enabled IP

H.6 BOOTP Server Application Messages

Table H-6: BOOTP Server Application Messages

Problem	Cause	Solution
Please retry when there is a BOOTPtab	No Bootfile found	Enter BOOTPtab file and retry
file
IP is disabled in the file issnmp.ini. For	IP discovery disabled in the Discovery	Enable IP Discovery in the
this application to run, enabled IP	Application	Discovery Application to
		enabled IP
Error to read packet	This message comes when a bad BOOTP	Retry. If the problem still
	packet is received	persists, reset the device
The address should contain only HEX	Validation for MAC address	Enter a valid MAC address
digits. i.e., 0-9, and A-F/(a-f)
Hardware address is not specified. So	This message appears during the	Enter Host name address in the
this entry cannot be saved	operation “Add entry to BOOTPtab file”	user entry form
IP address is not specified. So this entry	This message appears during the	Enter IP Address in the user
cannot be save	operation “Add entry to BOOTPtab file”	entry form
This is not a valid hardware address	User input invalid MAC address	A valid hardware address is a
		12 digit HEX number. For
		example: 01.23.45.67.89.AB

MIL-3000FTX Series of FastPort Print Servers H-2