Digi MIL-3000FTX manual Adding a New Printer, Next

3.2.5.3 Adding a New Printer

To add a new printer using “Add Printer Wizard”:

1.From Start-->Settings-->(open) Printers.

2.In the “Printers” menu, double-click Add Printer.

3.In the “Add Printer Wizard” menu, click Next to begin.

4.In the next menu, check Local Printer and click Next.

5.In the next menu, scroll down and select the appropriate printer. If the designated printer came with an installation disk, click Have Disk. If the designated printer did not come with an installation disk, see that printer’s documentation for a compatible printer.

Figure 3-6. Select Printer Screen

6.Click the appropriate port for the printer and then click Next (e.g., Figure 3-8 shows “c:\spool\Epson-4300” as the designated port).

Figure 3-7. Select Port Screen

7.Type in a name for the printer and select this printer as the default printer for Windows-based programs. Adding a name is optional. Click

Next.

MIL-3000FTX Series of FastPort Print Servers 3-11