Digi MIL-3000FTX Select Download PostScript File from this menu, 1.2Using Setup Defaults File

6.Edit the list of configuration choices.

7.Save the list and quit “TeachText.”

8.Open the “Apple Printer Utility” menu.

9.Select Download PostScript File from this menu.

10.Select the file to download.

11.When downloading is complete, quit the program.

If FastPort finds a syntax error, it sends a file with the error information. The error file is stored as a postscript log.

6.4.1.1Using Setup Printer Information File

Use Setup Printer Info to modify the variables for the parallel port. The info. is stored until the unit is powered off. FastPort does not know the characteristics of the parallel printer unless it is specifically loaded.

Note: This information is important when using the LaserWriter 8.0 drivers.

6.4.1.2Using Setup Defaults File

Downloading Setup Defaults will change the following FastPort configuration options. Table 6-1 lists the configuration options (Default is in parentheses).

Table 6-5: Option (Default is in Parenthesis)

Option	Choice	Description
EtherTalk Phase	1 or (2)	AppleTalk revision level.
Wait Times	Wait time before reset (15)	Amounts of time (measured in multiples of five sec) that FastPort waits
	Wait time after reset (45)	after and before a reset is sent to the printer prior to printing the first
	Note: 200 max for both	print job.
(Appear) In the	Yes (Sense) or No	No: Parallel printer always shows up in the Chooser regardless of
Chooser		whether there is a printer connected.
		Yes: FastPort senses whether a parallel printer is connected. If one is, it
		shows up in the Chooser.
Turn off the	Yes (Sense) or No	Yes: Serial port does not show up in the Chooser.
Serial port		No: Serial port shows up in the Chooser whether or not there is a printer
		connected to the serial port
Parallel port	(No Binary) or Binary	Parallel port type is based on the traffic type and whether or not the port
type	adobe or Binary hp	is handling Binary PS
Parallel port	(1), 2, 3, 4, or 5	1) Standard (Default) makes FastPort rely on Busy to determine if the
mode		port can receive a byte.
		2) Fast-DMA enables the DMA chip.
		3)AutoStrobe enables a hardware timer to generate the strobe pulse on
		the parallel port.
		4) Disabled is reserved.
		5) Use-ACK checks both the Busy and ACK signals on the parallel port
		when sending bytes.

MIL-3000FTX Series of FastPort Print Servers 6-4