Digi MIL-3000FTX manual 2.3SNMP Agent Parameters, Snmp Agent Parameters

•Enable IPX: When selected, FastManage enables IPX protocol. If not selected, FastManage will not perform any SNMP over IPX operation. Not checked by default.

•Do IPX Routing: When enabled, users can manage IPX devices across the router. If the device name is specified in the host file, then that device will be discovered (Enable IPX, Do IPX routing, and the Poll “hosts” file all have to be enabled). The “Enable IPX” parameter must be selected to enable this option. Checked by default.

•Do IPX Discovery: Use SNMP over IPX and find all devices that respond. The “Enable IPX” parameter must be selected to enable this option. Not checked by default.

•Enable NetBIOS: When this option is chosen, this enables NetBIOS using the NetBeui protocol. If not selected, this will not perform any SNMP over NetBIOS operation.

•Strict Name Resolution: When this is enabled, all device names starting with SNMPA will be treated as NetBIOS names. The “Enable NetBIOS” parameter must be selected to enable this option. Checked by default.

•Do NetBIOS Discovery: Uses SNMP over NetBIOS and finds all devices that respond. The “Enable NetBIOS” parameter must be selected to enable this option.

•Default: Initialize all the parameters to default values.

•Save Options: Saves all changes to the issnmp.ini file.

•Cancel: Cancels the changes.

8.2.2.3SNMP Agent Parameters

Figure 8-5. SNMP Agent Parameters

MIL-3000FTX Series of FastPort Print Servers 8-7