Emerson 54e pH/ORP instruction manual Ranges Factory Settings User Settings

MODEL 54e pH/ORP	SECTION 5.0
	SOFTWARE CONFIGURATION

TABLE 5-1. pH Settings List (continued)

ITEM	RANGES	FACTORY SETTINGS		USER SETTINGS
2b. Output 1 Setup (PID)
(a) Setpoint	-2 to 16 pH or -15 to 130°C		7 pH	_______
(b) Proportional	0-299.9%		100.0%	_______
(c) Integral	0-2999 sec		0 sec	_______
(d) Derivative	0-299.9%		0.0%	_______
(e) LRV (4 mA)	-2 to 16 pH or -15 to 130°C		2 pH	_______
(f) URV (20 mA)	-2 to 16 pH or -15 to 130°C		0 pH	_______
3. Output 2 Control
(a) Output 2 Measurement	Process/Temp/Glass Imp/Ref Imp		Temperature	_______
(b) Output 2 Control Mode	Normal/PID		Normal	_______
4a. Output 2 Setup (Normal)
(a) Current Range	4-20 mA/0-20 mA		4-20 mA	_______
(b) Dampening	0-255 Sec		0 Sec	_______
(c) Hold Mode	Last value/Fixed value		Last value	_______
(d) Fixed Hold Value (if (c) Fixed)	0-22 mA		21 mA	_______
(e) Fault value	0-22 mA		22 mA	_______
4b. Output 2 Setup (PID)
(a) Setpoint	-2 to 16 pH or -15 to 130°C		7 pH	_______
(b) Proportional	0-299.9%		100.0%	_______
(c) Integral	0-2999 sec		0 sec	_______
(d) Derivative	0-299.9%		0.0%	_______
(e) LRV (4 mA)	-2 to 16 pH or -15 to 130°C		2 pH	_______
(f) URV (20 mA)	-2 to 16 pH or -15 to 130°C		0 pH	_______
5. Hold (Outputs and Relays)	Disable/Enable/ 20 min timeout		Disable feature	_______
C. Alarms (Section 5.7)
1. Alarm 1 Control
(a) Activation Method	Process/Temp		Process	_______
(b) Alarm 1 Control Mode	Normal/TPC		Normal	_______
2a. Alarm 1 Setup (Normal)
(a) Configuration	Low alarm/High alarm/Off		Low	_______
(b) Hysteresis (deadband)	0 - 5.00 pH		0.01 pH	_______
(c) Delay Time	0-99 sec		0 sec	_______
(d) Relay Fault	Open/Closed/None		None	_______
2b. Alarm 1 Setup (TPC)
(a) Setpoint	-2 to 16 pH or -15 to 130°C		7 pH	_______
(b) Proportional	0-299.9%		100.0%	_______
(c) Integral	0-2999 sec		0 sec	_______
(d) Derivative	0-299.9%		0.0%	_______
(e) Time Period	10-2999 sec		30 sec	_______
(f) LRV (100% On)	-2 to 16 pH or -15 to 130°C		2 pH	_______
(g) URV (100% Off)	-2 to 16 pH or -15 to 130°C		0 pH	_______
(h) Relay Fault	None/Open/Closed		None	_______
3. Alarm 2 Control
(a) Activation Method	Process/Temp		Process	_______
(b) Alarm 2 Control Mode	Normal/TPC		Normal	_______
4a. Alarm 2 Setup (Normal)
(a) Configuration	Low alarm/High alarm/Off		High	_______
(b) Hysteresis (deadband)	0 - 5.00 pH		0.01 pH	_______
(c) Delay Time	0-99 sec		0 sec	_______
(d) Relay Fault	Open/Closed/None		None	_______
4b. Alarm 2 Setup (TPC)
(a) Setpoint	-2 to 16 pH or -15 to 130°C		7 pH	_______
(b) Proportional	0-299.9%		100.0%	_______
(c) Integral	0-2999 sec		0 sec	_______
(d) Derivative	0-299.9%		0.0%	_______
(e) Time Period	10-2999 sec		30 sec	_______
(f) LRV (100% On)	-2 to 16 pH or -15 to 130°C		2 pH	_______
(g) URV (100% Off)	-2 to 16 pH or -15 to 130°C		0 pH	_______
(h) Relay Fault	None/Open/Closed		None	_______

Continued on the following page

23