World Class 3000

Instruction Manual

IB-106-300NH Rev. 4.2 July 2002

!NOTE

Only one probe can be calibrated at a time. Probe calibrations must be scheduled appropriately in multiple probe applications.

PREFACE

The purpose of this manual is to provide a comprehensive understanding of the World Class 3000 Oxygen Analyzer components, functions, installation, and maintenance.

This manual is designed to provide information about the World Class 3000 Oxygen Ana- lyzer. We recommend that you familiarize yourself with the Overview and Installation sec- tions before installing your emissions monitor.

The overview presents the basic principles of the oxygen analyzer along with its perform- ance characteristics and components. The remaining sections contain detailed proce- dures and information necessary to install and service the oxygen analyzer.

DEFINITIONS

The following definitions apply to WARNINGS, CAUTIONS, and NOTES found throughout this publication.

Highlights an operation or maintenance procedure, practice, condition, state- ment, etc. If not strictly observed, could result in injury, death, or long-term health hazards of personnel.

Highlights an operation or maintenance procedure, practice, condition, state- ment, etc. If not strictly observed, could result in damage to or destruction of equipment, or loss of effectiveness.

NOTE

Highlights an essential operating procedure, condition, or statement.

: EARTH (GROUND) TERMINAL

: PROTECTIVE CONDUCTOR TERMINAL

: RISK OF ELECTRICAL SHOCK

: WARNING: REFER TO INSTRUCTION BULLETIN

NOTE TO USERS

The number in the lower right corner of each illustration in this publication is a manual illus- tration number. It is not a part number, and is not related to the illustration in any technical manner.

Rosemount Analytical Inc. A Division of Emerson Process Management

P-1

Page 15
Image 15
Emerson B-106-300NH instruction manual Preface, Definitions