Emerson B-106-300NH instruction manual Appendix D, Effective June, 1994 Rev

	HIGHLIGHTS OF CHANGES
	APPENDIX D
	Effective June, 1994 Rev. 2
Page	Summary
Page D-1	MPS outline drawing changed to show new MPS.
Page D-2	MPS interior view replaced with new MPS in Figure D-2.
Page D-3	"Optional" for check valve deleted in Figure D-3.
Page D-4	Drawing showing location of optional Z-Purge added as Figure D-4.
Page D-7	Power supply replacement procedures in paragraph D-7 changed to
	reflect new design in the MPS. Solenoid valve replacement proce-
	dures in paragraph D-8 changed to reflect new design in the MPS.
Page D-8	Old exploded view of MPS replaced with new MPS.
Page D-10	Paragraph D-11, Adding Probes to the new MPS, added.
Page D-11	Change part numbers for the power supply, solenoid valve, and test
	gas flowmeter assembly. Add part numbers for reference gas flow-
	meter assembly and all the parts in the probe adder kit.
	Effective January, 1995 Rev. 2.1
Page	Summary
Page D-1	Updated Figure D-1, MPS 3000 to include hinge.
	Effective May, 1996 Rev. 2.2
Page	Summary
Page D-11	Updated replacement parts list to reflect new part numbers.
	Effective January, 1997 Rev. 2.3
Page	Summary
Page D-1	Added warning to read new safety instructions.
Page D-2	Corrected Table D-1 Specifications listing, 1st entry.
Page D-5	Added protective covers and grounds warning.
Page D-7	Added protective covers and grounds warning, corrected item num-
	ber errors in paragraph D-6.
Page D-11	Added expanded fuse descriptions.
	Effective July, 1998 Rev. 2.4
Page	Summary
---	Changed test gas to calibration gas and reference gas to reference
	air throughout the appendix.