Emerson Process Management 3-9000-745 3.1.2 Setting the heaters type

MON20/20 Software for Gas Chromatographs User Manual
SEPTEMBER 2010 3-9000-745
3-3
3.1.2 Setting the heater’s type
To set a heater’s type, do the following:
1. Select Heaters... from the Hardware menu.
Figure 3-2. The Heaters window
2. Click on the appropriate Heater Type cell and select AC or DC from
the drop-down list.
3. To save the changes without closing the window, click Save. To save
the changes and close the window, click OK.