MON20/20 Software for Gas Chromatographs User Manual
SEPTEMBER 2010 3-9000-745
7-3
7.1.2 Setting communication parameters
To determine or reset the communications parameters used by the
Modbus program, do the following:
1. Select Modbus Test... from the Tools menu. The Modbus Test
Program window displays. The current port settings display in the
window’s title bar.
Figure 7-1. The Modbus Test Program window with current port setting in title bar
Note
If MON 20/20 displays an error message, verify the installation directory via the
Program Settings window (see Section 1.2.5).