User Manual MON20/20 Software for Gas Chromatographs
3-9000-745 SEPTEMBER 2010
3-2
3.1.1 Renaming a heater
To assign an identifying label to a heater, do the following:
1. Select Heaters... from the Hardware menu. The Heaters window
displays.
Figure 3-1. The Heaters window
2. Double-click on the appropriate row under the Label column for the
heater that you want to name.
Note
The heaters are labelled Heater 1 - Heater N by default, where N equals the total
number of heaters available to the GC.
3. Type in a descriptive name for the heater. This name must be unique;
two heaters cannot share the same label.
4. Click OK.