User Manual MON20/20 Software for Gas Chromatographs
3-9000-745 SEPTEMBER 2010
6-4
Note
To view the results of the Auto Sequence run, select Report Display from the Logs/
Reports menu.
6.3 Analyzing a single stream
Note
If an analysis run is in progress, it must be stopped before auto sequencing can be
started. See “Stopping an Analysis Run” on page 6-9 for more information.
To start an analysis run on a single calibration or sample stream, do the
following:
1. Select Single Stream... from the Control menu. A confirmation
message displays.
Figure 6-6. Confirmation message
2. Select a stream from the Stream menu.
3. Check the Purge stream for 60 seconds check box to set the purging
option. The checkbox is selected by default.