User Manual MON20/20 Software for Gas Chromatographs
3-9000-745 SEPTEMBER 2010
3-26
Note
The GC’s switch panel settings override MON 20/20’s settings.
To set a discrete input’s operational mode, do the following:
1. Select Discrete Input... from the Hardware menu. The Discrete
Input window displays.
Figure 3-17. The Discrete Inputs window
2. Select the desired mode from the drop-down menu under the Switch
cloumn for the discrete input.
3. To save the changes and leave the window open so that you can
monitor the discrete input’s progress, click Save. The current state of
the discrete input displays in the State column, and is updated in real
time.
4. To save the changes and close the window, click OK.