MON20/20 Software for Gas Chromatographs User Manual
SEPTEMBER 2010 3-9000-745
6-3
To initiate auto-sequencing, do the following:
1. There are three ways of initiating auto sequencing:
• Select Auto Sequence... from the Control menu.
•Press F2.
• Click on the Toolbar.
A confirmation message displays.
Figure 6-4. Confirmation message
2. Check the Purge stream for 60 seconds check box to set the purging
option. The checkbox is selected by default.
Note
Purging allows sample gas to flow through the sample loop for 60 seconds prior to
beginning the first analysis.
3. Click Yes and auto sequencing starts. Use the Mode column on the
GC Status Bar to monitor the status of the analysis run.
Figure 6-5. The GC Status Bar