Xi Advanced Electronics
Instruction Manual
IM-106-910Xi, Original Issue November 2010
SPECIFICATIONS
Measurement Specifications
Net O2 Range: | 0 to 50% O2 user scalable | |
| ||
Lowest Detectable Limit: | 0.01% O2 | |
Signal Stability: | ±0.03% O2 | |
Accuracy in Reducing Conditions: | ±10% of reading or 0.1% O2 | |
System Response in Reducing | going from oxidizing to reducing | |
Conditions: | going from reducing to oxidizing | |
Ambient Temperature Effect on Xi | less than 0.0025% O2 per degree Celsius | |
|
| |
Environmental Specifications |
|
|
|
|
|
Xi Advanced Electronics: | Type 4X/IP66, Polycarbonate Material | |
Ambient Temperature Limits: | ||
| ||
| electronics | |
|
|
|
Xi LCD display: | ||
Ambient Temperature Limits | ||
General Purpose Certifications: |
|
|
Installation Specifications |
|
|
Mounting: | Panel, wall, or pipe. | |
|
|
|
Reference Air: | 0.5 scfh (0,25 /min), clean, dry, | |
| (20.95% O2), regulated to 5 psi (34 kPa) | |
Calibration: | ||
|
|
|
Cal Gases: | 0.4% O2 and 8% O2, balance N2 | |
Traditional Architecture Cable | 200 ft (61 m) maximum length | |
|
|
|
Transmitter Electrical Power: | 12 - 24 VDC | |
|
|
|
Electrical Power for Xi: | |
Power Consumption of Xi: | 12 VA maximum or |
| 776 VA maximum with Traditional Architecture, |
| 120V Probes |
| 450VA maximum with Traditional Architecture, |
| 44V Probes |
Alarm Relay Outputs: | Two provided - 2 Amperes, 30 VDC, |
|
|
Optional Loss of Flame Input: | Internally powered input to remove heater power |
| actuated via dry contact output from user’s* flame |
| scanner |
|
|
Emerson Process Management has satisfied all obligations from the
European legislation to harmonize the product requirements in Europe. 1All static performance characteristics are with operating variables constant. Specifications subject to change without notice.
