Instruction Manual
IM-106-910Xi, Original Issue
November 2010 Xi Advanced Electronics
http://www.raihome.com
Section 3 Configuration of Xi Electronics
Verify Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-1
Xi Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-2
Set Test Gas Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-2
Alarm Relay Output Configuration . . . . . . . . . . . . . . . . . . page 3-3
Analog Output Configuration . . . . . . . . . . . . . . . . . . . . . .page 3-4
Autocalibration Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3-5
Optional Advanced Features Inside the Xi . . . . . . . . . . . . page 3-6
Extended Process Temperature Range to 800°C . . . . . . .page 3-6
Stoichiometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-7
Programmable Reference . . . . . . . . . . . . . . . . . . . . . . . . .page 3-7

VERIFY INSTALLATION

Install all protective equipment covers and safety ground leads be fore equipment startup.
Failure to install covers and ground leads could result in serious injury or death.
If external loop power is used, the power supply must be a sa fety extra low voltage (SELV)
type.