Emerson Process Management IM-106-910Xi instruction manual Section, Installation

Instruction Manual

IM-106-910Xi, Original Issue November 2010

Xi Advanced Electronics

Section 2 Installation

System Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-2

Mechanical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-2

Xi Advanced Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-2

Electrical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-5

Xi Advanced Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-5

Optional Flame Safety Interlock . . . . . . . . . . . . . . . . . . . . page 2-7

Traditional Architecture Cable Connections . . . . . . . . . . page 2-7

Before installing this equipment read the "Safety instructions for the wiring and installation of this apparatus" at the front of this Instruction Manual. Failure to follow safety instructions could result in serious injury or death.

Install all protective equipment covers and safety ground leads after installation. Failure to install covers and ground leads could result in serious injury or death.

The Xi Advanced Electronics can be installed in general purpose areas only. Do not install the Xi in hazardous areas or in the vicinity of flammable liquids.

If external loop power is used, the power supply must be a safety extra low voltage (SELV) type.

NOTE

All unused ports on the probe housing and Xi enclosure should be plugged with a suitable fitting.

http://www.raihome.com